Products
Three-In-One Plastic Granulators
● High torque gearbox: More power saving when motor output. Gear box is precision ground gears, low noise, smooth operation
● screw and barrel are made of imported materials:Good wear resistance and long service life
● mold head cutting pellet: The labor cost of manual pulling can be eliminated.
● Extruder with pressure-sensitive side gauge: When the pressure is too high, the warning light or the buzzer will notify to replace the filter screen
● Single extrusion model: Suitable for granulation of clean raw materials, such as leftovers and leftovers of cut film
● Applicable materials: PP, OPP, BOPP, HDPE, LDPE, LLDPE, ABS, HIPS and other recycled plastics
Drying Equipment for Plastics Processing
● Rapid and even heating with precise control.
● Equipped with over-temperature protection for safety and reliability.
● Can be equipped with a timer, hot air recycling, and a stand.
Industrial Vacuum Conveyors for Sale
● Small in size, easy to move the whole machine and easy to install;
● Equipped with a wired controller for convenient operation;
● Comes with motor start protection, carbon brush fault and usage time reminder;
● The hopper and base can be adjusted in any direction;
● Equipped with a differential pressure switch and filter clogging alarm function;
● Equipped with an automatic cleaning device to reduce the frequency of manual cleaning.
Oil-Type Mold Temperature Machine
● The temperature control system is fully digital and uses a P.I.D. segmented control method, which can maintain a stable mold temperature with a temperature control accuracy of ±1℃ in any operating state.
● The machine uses a high-efficiency and high-temperature pump with high pressure and stability.
● The machine is equipped with multiple safety devices. When a malfunction occurs, the machine can automatically detect the abnormality and indicate the abnormal condition with a warning light.
● The electric heating tubes are all made of stainless steel.
● The standard heating temperature of the oil-type mold temperature machine can reach 200℃.
● The advanced circuit design ensures that high-temperature cracking does not occur in the event of an oil circuit failure.
● The appearance of the machine is beautiful and generous, and it is easy to disassemble and maintain.
Water Mold Temperature Controller
● Adopting a fully digital P.I.D segmented temperature control system, the mold temperature can be maintained stable under any operation state, and the temperature control accuracy can reach ±1℃.
● Equipped with multiple safety devices, the machine can automatically detect abnormalities and indicate the abnormal conditions with indicator lights when a failure occurs.
● Direct cooling with excellent cooling effect, and equipped with an automatic direct water replenishment device, which can quickly cool down to the set temperature.
● The interior is made of stainless steel and is explosion-proof under high pressure.
● The appearance design is beautiful and generous, easy to disassemble, and convenient for maintenance.
Water-Cooled Industrial Chiller
● The machine adopts high-quality imported compressors and water pumps, which are safe, quiet, energy-saving, and durable.
● The machine uses a fully computerized temperature controller, with simple operation and accurate control of water temperature within ±3℃ to ±5℃.
● The condenser and evaporator are uniquely designed for better heat transfer efficiency.
● The machine is equipped with protection features such as overcurrent protection, high and low voltage control, and electronic time-delay safety device. In case of a malfunction, it will promptly issue an alarm and display the cause of the failure.
● The machine has a built-in stainless steel insulated water tank, which is easy to clean.
● The machine has reverse phase and under-voltage protection, as well as anti-freezing protection.
● The ultra-low temperature type cold water machine can reach below -15℃.
● This series of cold water machines can be customized to be resistant to acid and alkali.
Air-Cooled Industrial Chiller
● Cooling temperature range is 7℃-35℃.
● Stainless steel insulated water tank with anti-freezing protection device.
● Refrigerant uses R22 with good refrigeration effect.
● The refrigeration circuit is controlled by high and low-pressure switches.
● Both the compressor and pump have overload protection.
● Uses Italian-made precision temperature controller with an accuracy of 0.1℃.
● Easy to operate, simple structure, and easy to maintain.
● Low-pressure pump is standard equipment, and medium or high-pressure pumps can be optionally selected.
● Can be optionally equipped with a water tank level gauge.
● Uses a scroll compressor.
● The air-cooled industrial chiller uses a plate-type condenser with excellent heat transfer and fast heat dissipation, and does not require cooling water. When converted to the European safety circuit type, the model is followed by “CE”.